
Short answer: for most Jeep owners, the BlueDriver Pro — Chrysler is a named group in its published advanced-diagnostics list with no model-year cutoff, it reaches ABS, airbag and TPMS as well as the engine, and it charges nothing to keep. But if your Jeep is a 2018 or newer and you want to clear codes or command a component rather than just read, the published facts point somewhere else: FCA fitted a Security Gateway Module to a selection of 2018-and-newer vehicles, and the TOPDON TopScan is the only tool in our registry whose maker publishes authorized access to it — with an annual subscription TOPDON itself flags on the same line.
The short version
- What we ranked on: published module access, whether the maker publishes FCA security-gateway access, whether the tool can command a component, and the stated update terms. No tool was ranked on a brand name or on a retailer listing.
- ALLDATA, which had to implement the authentication itself, publishes that the gateway appeared on "a selection of their 2018 and newer model vehicles" across Jeep, Fiat, Chrysler and Dodge — and that "FCA authorization is not required for basic scans".
- Clearing codes and advanced functions such as system tests and actuations are the parts that need authentication. Reading is not.
- TOPDON is the only maker in our registry that publishes gateway access and names FCA. It also publishes the cost honestly: "*Requires manufacturer subscription".
- No tool publishes a Jeep-specific bus. OBDLink, the registry's protocol specialist, names Ford MS-CAN and GM SW-CAN and stops — so there is no network premium to pay on a Jeep.
What actually changes when the car is a Jeep
Every OBD2 tool on sale reads the same legislated powertrain data out of the same 16-pin connector on every 1996-and-newer vehicle sold in the US. That has never been make-specific. What is make-specific is everything past the powertrain — the ABS module, the airbag module, the transmission controller, the body modules — and, on a Jeep specifically, one extra thing no other make in this hub has: a gate between the port and the modules.
FCA, now part of Stellantis, began fitting a Security Gateway Module to its vehicles for the 2018 model year. ALLDATA publishes that it was introduced on "a selection of their 2018 and newer model vehicles" across Jeep, Fiat, Chrysler and Dodge — a vendor statement worth more than most, because ALLDATA had to build the authentication into its own product to keep working on those cars. The authentication itself runs through AutoAuth, which describes its own job as ensuring "that only authenticated tools and technicians can perform protected functions".
Read that as a buyer and the shopping question changes shape. It is no longer "which scanner sees the most modules on my Jeep". It is "which functions am I buying, and are the ones I actually want on the protected side of the gate".
What the gateway blocks, and what still works
This is the part most product listings never mention, and it is the reason this page ranks the field differently from our main scanner roundup.
| What you want to do | On a pre-2018 Jeep | On a gateway-equipped Jeep |
|---|---|---|
| Read stored and pending codes | Works | Works — basic scans need no authorization |
| See live data | Works | Works, as part of a basic scan |
| Clear a code / turn the light off | Works | Needs authorization |
| Run a system test or actuate a component | Tool-dependent | Needs authorization |
| Service resets and calibrations | Tool-dependent | Needs authorization |
The asymmetry is the whole point. Diagnosis is open; changing the car's state is not. For a first scanner that matters enormously, because the single most common reason a beginner buys one is to switch off a light — and on a 2019 Wrangler that is the exact function most likely to be refused by a tool with no AutoAuth credential behind it.
It is also worth being clear about what the gate is not. It is not a ban on aftermarket tools, it is not permanent, and it is not a reason to buy dealer-grade equipment for a driveway. It is a login. Tool makers that have implemented it register each tool by serial number with AutoAuth, and the owner or shop pays an annual subscription for the account.
The one published claim that names FCA
We went through every maker page behind the five tools in this registry looking for a first-party statement about the gateway. One has it. TOPDON's own TopScan page carries a section headed "Complete Security Gateway Access", which reads: "Gain necessary, authorized access to perform advanced diagnostics and bidirectional controls on secure vehicles from FCA, Renault, Nissan, and more." Directly beneath it, on the same page, is the footnote "*Requires manufacturer subscription".
We quote both halves deliberately. The capability is published and so is its price tag, and a page that mentioned the first without the second would be selling you something. TOPDON also publishes the protocol detail with a date attached — CAN-FD "for 2020+ GM and Chrysler" — which is the one other Jeep-relevant line item anywhere in our source set: on a recent Jeep the faster bus is a real compatibility question, not marketing.
Nobody else comes close. Autel's MK808S page publishes bi-directional active tests and a service-function list but never mentions AutoAuth, FCA or CAN FD. Innova publishes bi-directional control and free updates and names no gateway. BlueDriver publishes a Chrysler coverage group and says nothing about 2018. FOXWELL publishes engine systems and an I/M readiness key. Those are all real capabilities — none of them is a gateway claim, and we have not turned them into one.
The five tools on published specification
| Tool | Published systems | FCA gateway claim | Bi-directional | Update terms |
|---|---|---|---|---|
| BlueDriver Pro | Engine, ABS, airbag (SRS), TPMS, transmission codes | None published | No | No subscriptions or add-ons, as published |
| TOPDON TopScan | Full-system code reading, 13 maintenance services | Published, names FCA | Yes (subscription) | 1 year included, then per-tier renewal |
| Innova 5610 CarScan Pro | Engine, transmission, ABS, SRS | None published | Yes | Free, no subscription |
| Autel MaxiCOM MK808S | Full system plus service functions | None published | Yes | Not published |
| FOXWELL NT301 | CAN OBDII / EOBD engine systems | None published | No | Not published |
"None published" means the maker does not state it on the specification page cited at the foot of this page. It is not a claim that the tool cannot do it — several of these makers support AutoAuth on other models in their ranges. We would rather show you the gap than fill it in from a retailer listing or a forum post.
Why the OBDLink MX+ is not on this page
It is the best-built dongle in our registry and it is the one we would recommend on a Ford or a GM, so its absence here needs explaining. OBDLink publishes its manufacturer-network support precisely: all legislated OBD-II protocols plus "advanced Ford & GM vehicle networks (MS-CAN and SW-CAN)". Those are the only two it names, and Chrysler, Jeep, Dodge and Ram appear nowhere on the page. The headline reason a Ford owner or a GM owner pays that premium does not transfer to your Jeep. The rest of the tool is still excellent — if you want to log an intermittent fault at high resolution, it publishes the highest sample rate here — but that is a reason to buy it for logging, not a reason to put it on a Jeep page.
Which one should you buy?
Jeep built before 2018, one vehicle, you want to understand the lights: the BlueDriver Pro. Chrysler is in its published coverage group list with no year cutoff, it reaches the three modules past the engine that matter on a road vehicle, and it costs nothing to keep.
2018 or newer, and you intend to do the work yourself: the TOPDON TopScan, with the AutoAuth subscription budgeted alongside it. It is the only tool here that publishes the access, and the only one that dates its CAN FD support to the model years a recent Jeep actually uses.
You want a screen in your hand, not a phone: the Innova 5610 on a pre-gateway Jeep. Check Innova's coverage tool against your VIN first if the Jeep is newer.
You are doing brake or battery work that ends in a reset: the Autel MK808S, for the service functions and not for the gateway.
You just want the code off the dash for the least money: the FOXWELL NT301, understanding that on a newer Jeep it will read the fault and may not be allowed to erase it.
Whichever you buy, buy it before you need it. A tool already in the glovebox turns a warning light on a back road into a ten-minute read instead of a tow decision. Best OBD2 scanner for beginners is where we would send a first-time buyer, and bidirectional vs basic explains what commanding a component actually means before you pay for it.



