Skip to content
JACK & TORQUE

Roundup

Best High-Lift Floor Jacks

Minimum height gets the jack under the car. Maximum lift is what gets the car onto the stands.

By Ryder M. · Published November 10, 2026 · Last reviewed November 10, 2026

We earn a commission when you buy through the Amazon links on this page, at no extra cost to you. It never changes which tool we put first, and we publish no price we have not verified. How this site is funded.

Best High-Lift Floor Jacks — ranked picks with scores and a price check for each
#PickCapacityScorePrice
1
Sunex 66035HR Skyhawk 3.5-Ton High Reach Floor Jack, Amazon product photo
Sunex 66035HR Skyhawk 3.5-Ton High Reach Floor JackBest high-lift jack overall
3.5 ton8.8
2
Arcan A20016 2-Ton Extra Long Reach Low-Profile Floor Jack, Amazon product photo
Arcan A20016 2-Ton Extra Long Reach Low-Profile Floor JackBest reach on a 2-ton rating
2 ton (4,000 lb)8.6
3
GEARWRENCH GWLPFJ3T 3.5-Ton Low-Profile Floor Jack, Amazon product photo
GEARWRENCH GWLPFJ3T 3.5-Ton Low-Profile Floor JackBest high-lift jack with a named standard
3.5 ton (7,000 lb)8.8
4
BIG RED T83006 3-Ton Hydraulic Trolley Jack, Amazon product photo
BIG RED T83006 3-Ton Hydraulic Trolley JackBudget pick - the cheapest jack that reaches past 20 in
3 ton (6,000 lb)8.5
5
BIG RED T46002A 6-Ton Double-Locking Jack Stands, Amazon product photo
BIG RED T46002A 6-Ton Double-Locking Jack StandsThe stands high lift exists to reach
6 ton (12,000 lb)8.8

Product photographs come from each product's own Amazon listing via the Associates program. They are the seller's images, not photographs of anything we own — we have no test rig and claim none.

Sunex 66035HR Skyhawk 3.5-Ton High Reach Floor Jack, Amazon product photo

Short answer: the Sunex 66035HR Skyhawk, which publishes 24.4 in of maximum lift from a 3.58 in start and an ASME PASE compliance statement - the best combination of reach and fit on the site. The Arcan A20016 matches it almost exactly on the ceiling (24 in) with the lowest published start anywhere (2.75 in) if you can live with a 2-ton rating. The budget pick is the Torin BIG RED T83006: the cheapest jack here that clears 20 in, as long as your car accepts its 5-7/8 in minimum height.

What we judged these on

1. Published maximum lift

The premise of the page, and a published figure rather than a judgment: 24.4 in on the Sunex Skyhawk, 24 in on the Arcan A20016, 21.75 in on the GEARWRENCH GWLPFJ3T, 20-7/8 in on the Torin T83006, 18 in on the Arcan A20019. Only the first two reach the top setting of a 6-ton stand. Everything above 20 in covers the top setting of a 3-ton stand with room to spare.

2. Minimum height, because reach is useless if it will not fit

High-lift jacks are usually tall jacks, and that is the trap. The two with the highest ceilings here also publish the two lowest starts - 2.75 in on the A20016 and 3.58 in on the Skyhawk - which is unusual and is most of the reason they are ranked first and second. The T83006 reaches 20-7/8 in but needs 5-7/8 in of clearance to get under the car in the first place.

3. Chassis length, the spec nobody reads

Travel gets the saddle up; chassis length gets the saddle in. Arcan publishes a 32 in extra-long chassis on the A20016 and Sunex publishes an 18 in extended chassis on the Skyhawk. On a truck, where the center lift point can be well inboard of the rocker, a short jack with a tall ceiling cannot reach the point at all. Do I need a long reach floor jack is the page for working that out.

4. What the height costs you

Published weights here are 92.59 lb and 96.8 lb at the top of the range. High lift means a longer cylinder, a longer chassis and more steel, and there is no version of this where you get 24 in of travel in a 22 lb package. If you lift a car twice a year in a driveway, a high-lift jack is the wrong purchase; if you own a truck, nothing else works.

Published ceilings, side by side

Published lift range, chassis length and standards claim for every high-lift jack on this page
JackCapacityLift rangeChassisStandards claim
Sunex 66035HR Skyhawk3.5 ton3.58 - 24.4 in18 in extendedASME PASE compliant
Arcan A200162 ton2.75 - 24 in32 in extra-longNone published
GEARWRENCH GWLPFJ3T3.5 ton3.75 - 21.75 inNot publishedMeets ASME PASE-2019
BIG RED T830063 ton5-7/8 - 20-7/8 inNot publishedSafety bypass system
BIG RED T46002A (stands)6 ton per pair15-3/8 - 23-13/16 inPyramid baseTested to meet ASME
Published lift range, chassis length and standards claim for every high-lift jack on this page

The last row is not a jack. It is there because it is the height the first two rows exist to beat, and because a high-lift jack bought without tall stands leaves you exactly where you started.

Who actually needs a high-lift jack

Three groups. Owners of pickups and body-on-frame SUVs, whose frame rails sit above what a 14 in jack can reach. Anyone who needs a wheel fully clear of the ground with the suspension hanging - for a brake line, a hub, a spring - because a drooping suspension eats several inches of your lift before the tire moves. And anyone working on a vehicle that has to go onto 6-ton stands, since those start at 15-3/8 in and the car has to be raised past that before it can be lowered onto them.

Everyone else is better served by fit than by reach. On a stock sedan, 18 in of lift from a 56 lb aluminum jack is a more useful tool than 24 in from a 93 lb one. Best floor jacks ranks the field on overall fit for a car, and best floor jack for an SUV covers the middle case.

What we would buy

For a truck or a tall SUV: the Sunex 66035HR Skyhawk, for 24.4 in of travel, an 18 in extended chassis and a published PASE compliance statement. For a low car that also needs a long reach inboard: the Arcan A20016, accepting the 2-ton rating. For a garage that wants the widest usable range with the clearest paperwork: the GEARWRENCH GWLPFJ3T. And if the budget is the constraint and your car has normal ride height, the T83006 reaches past 20 in for a fraction of any of them - buy the tall stands with it, or the height buys you nothing.

The picks in full

Every pick, in detail

Sunex 66035HR Skyhawk 3.5-Ton High Reach Floor Jack, Amazon product photo

1. Best high-lift jack overall

Sunex 66035HR Skyhawk 3.5-Ton High Reach Floor Jack

Sunex Tools · score 8.8/10

24.4 in of lift from a 3.58 in start — the longest reach of any jack on this site, and the only one here whose maker states ASME PASE compliance outright.

The Sunex 66035HR Skyhawk publishes the highest ceiling of anything on this site - 24.4 in - and does it from a 3.58 in minimum, which is the rare combination. Also published: 3.5 ton, an 18 in extended chassis, a 4.6 in oversized saddle, and ASME PASE compliance. The extended chassis is what makes the height usable, because reaching a center lift point under a truck needs length as well as travel. It is the most expensive jack here and it is shop equipment, not a trunk tool.

Published specifications

Capacity
3.5 ton Sunex Tools
Min height
3.58 in Sunex Tools
Max height
24.4 in Sunex Tools
Chassis
18 in extended chassis Sunex Tools
Saddle
4.6 in oversized saddle Sunex Tools
Standards
ASME PASE compliant Sunex Tools

What works

  • 24.4 in of lift reaches a lifted truck's frame rail, which almost nothing else here does
  • 3.58 in minimum means the high reach costs you nothing at the low end
  • Sunex states ASME PASE compliance, which most jack makers do not

What you give up

  • A 50 in handle and an extended chassis need a real garage bay, not a carport corner
  • Far more jack than a sedan owner will ever use
  • Sunex does not publish a net weight for this model

Our scoring

  • Fit & reach9.2
  • Safety margin8.8
  • Beginner ease8.0
  • Build quality9.2
  • Value7.4
$379.99 · View on Amazon

#ad Price as of November 16, 2026. How this is funded

Specifications published by Sunex Tools — we earn nothing from that link.

Arcan A20016 2-Ton Extra Long Reach Low-Profile Floor Jack, Amazon product photo

2. Best reach on a 2-ton rating

Arcan A20016 2-Ton Extra Long Reach Low-Profile Floor Jack

Arcan · score 8.6/10

2.75 in to 24 in on a 2-ton frame — a 21-1/4 in spread, the widest range of any jack on this site, from a 32 in extra-long chassis.

The Arcan A20016 publishes 2.75 in to 24 in on a 32 in extra-long chassis at 92.59 lb and 2 ton (4,000 lb). Within a tenth of the Skyhawk's ceiling, with the lowest published start of any jack on the site, and the longest chassis - so it is the pick when the lift point is a long way in from the sill on a car that also sits low. The limits are the rating and the weight: 2 ton is plenty for a car but is the thinnest margin here, and 92.59 lb is a lot of jack to reposition.

Published specifications

Capacity
2 ton (4,000 lb) Arcan Professional Tools
Min height
2.75 in Arcan Professional Tools
Max height
24 in Arcan Professional Tools
Chassis
32 in extra-long chassis Arcan Professional Tools

What works

  • A 21-1/4 in spread between minimum and maximum is the widest range here
  • 2.75 in gets under a genuinely low car without ramps or boards
  • The 32 in chassis puts the saddle well inside the vehicle, not at the sill

What you give up

  • 92.59 lb — this is a jack you roll, not one you lift into a trunk
  • 2 ton leaves less capacity headroom than a 3-ton jack
  • Arcan backs it with a 1 year warranty, where some competing jacks publish three

Our scoring

  • Fit & reach8.8
  • Safety margin8.2
  • Beginner ease8.4
  • Build quality9.2
  • Value7.6
$252.79 · View on Amazon

#ad Price as of November 16, 2026. How this is funded

Specifications published by Arcan — we earn nothing from that link.

GEARWRENCH GWLPFJ3T 3.5-Ton Low-Profile Floor Jack, Amazon product photo

3. Best high-lift jack with a named standard

GEARWRENCH GWLPFJ3T 3.5-Ton Low-Profile Floor Jack

GEARWRENCH · score 8.8/10

3.75 in to 21.75 in on a dual-piston fast-lift pump — the least tiring jack here to use repeatedly, and one of only two on this site whose maker states ASME PASE compliance outright.

The GEARWRENCH GWLPFJ3T publishes 3.75 in to 21.75 in, 3.5 ton (7,000 lb), a Dual Piston Fast Lift pump, 96.8 lb, a 1-year warranty, and a statement that it meets ASME PASE-2019 - the only jack here that names the edition of the standard. Nearly 22 in of travel covers any passenger car and most crossovers, and the fast-lift pump means you reach the top of that range in fewer strokes. It is also the heaviest jack on this page.

Published specifications

Capacity
3.5 ton (7,000 lb) GEARWRENCH
Min lift height
3.75 in GEARWRENCH
Max lift height
21.75 in GEARWRENCH
Pump
Dual Piston Fast Lift GEARWRENCH
Standards
Meets ASME PASE-2019 GEARWRENCH
Weight
96.8 lb GEARWRENCH
Warranty
1 year GEARWRENCH

What works

  • Dual-piston fast-lift pump brings the saddle to the load in a few strokes
  • 3.75 in minimum and 21.75 in maximum covers cars and crossovers on one jack
  • GEARWRENCH states it meets ASME PASE-2019, which most jack makers do not

What you give up

  • At 96.8 lb it is markedly heavier to move than an aluminum jack
  • A 31.1 in long-arm chassis needs real floor space to swing the handle
  • Only a 1-year warranty, the shortest of any jack on this page

Our scoring

  • Fit & reach9.2
  • Safety margin8.8
  • Beginner ease8.8
  • Build quality8.4
  • Value9.0
$206.00 · View on Amazon

#ad Price as of November 16, 2026. How this is funded

Specifications published by GEARWRENCH — we earn nothing from that link.

BIG RED T83006 3-Ton Hydraulic Trolley Jack, Amazon product photo

4. Budget pick - the cheapest jack that reaches past 20 in

BIG RED T83006 3-Ton Hydraulic Trolley Jack

Torin (BIG RED) · score 8.5/10

Reaches 20-7/8 in, which is the number that matters if your vehicle sits high — but its 5-7/8 in minimum means it will not slide under a low car.

The cheapest route to real height. Torin publishes 3 ton (6,000 lb), 5-7/8 in to 20-7/8 in, steel, a 24.5 in handle, and a safety bypass system. That ceiling clears the top setting of every 3-ton jack stand we cover, which is the practical test this page is about. What you give up is the bottom of the range: 5-7/8 in is too tall for a low car, and no accessory fixes that.

Published specifications

Capacity
3 ton (6,000 lb) Torin
Lift range
5-7/8 in – 20-7/8 in Torin
Material
Steel Torin
Handle length
24.5 in Torin
Overload protection
Safety bypass system Torin

What works

  • 20-7/8 in of lift handles pickup and SUV ride heights
  • Extra-long saddle neck saves pumping on tall vehicles
  • Steel construction at a price most first-time buyers will accept

What you give up

  • 5-7/8 in minimum height rules out most low cars
  • Heavier to move around than an aluminum jack of the same capacity
  • Single-piston pump means more strokes than a dual-piston jack

Our scoring

  • Fit & reach8.2
  • Safety margin8.6
  • Beginner ease8.4
  • Build quality8.2
  • Value9.0
$89.90 · View on Amazon

#ad Price as of November 16, 2026. How this is funded

Specifications published by Torin (BIG RED) — we earn nothing from that link.

BIG RED T46002A 6-Ton Double-Locking Jack Stands, Amazon product photo

5. The stands high lift exists to reach

BIG RED T46002A 6-Ton Double-Locking Jack Stands

Torin (BIG RED) · score 8.8/10

15-3/8 in to 23-13/16 in is the range a pickup actually sits at, on 12,000 lb of rated capacity — buy this instead of stretching a 3-ton stand.

Height on a jack is only worth buying if you own supports that need it. Torin publishes 15-3/8 in to 23-13/16 in on these 6-ton stands, with a ratchet bar plus a safety pin, forged steel, a wide pyramid base, and testing to meet ASME standards. Those numbers are the reason the jacks above exist: a jack has to lift the vehicle past 23-13/16 in to set these at the top, and almost nothing does. Note the 6-ton figure is quoted per pair.

Published specifications

Capacity
6 ton (12,000 lb) Torin
Min height
15-3/8 in Torin
Max height
23-13/16 in Torin
Construction
Forged steel, welded frame, pyramid base Torin
Standards
Tested to meet ASME standards Torin

What works

  • Height range genuinely fits trucks, vans and body-on-frame SUVs
  • Wide pyramid base is the most stable footprint in this set
  • Capacity headroom you will not run out of on a light-duty vehicle

What you give up

  • 15-3/8 in minimum is far too tall for a car
  • Heavy enough to be awkward to position one-handed
  • Overkill, and over-tall, for sedan work

Our scoring

  • Fit & reach8.0
  • Safety margin9.4
  • Beginner ease8.4
  • Build quality8.6
  • Value9.0
$64.99 · View on Amazon

#ad Price as of November 16, 2026. How this is funded

Specifications published by Torin (BIG RED) — we earn nothing from that link.

Method

How these picks were chosen

We did not test these tools. We do not run a laboratory, we have not loaded a jack to failure or checked a wrench on a calibration bench, and we will not tell you otherwise. What we did instead is read the published manufacturer specifications, check the figures that matter against the safety standard that applies to portable automotive lifting equipment, and work out which tool suits which job. Every number on this page links to where it came from, so you can check us.

The five things we score are the five that decide a first purchase: will it fit under and lift your car, how much safety margin the rating and the locking mechanism leave you, how hard it is to get right alone in a driveway, what the materials and published standards say about how long it lasts, and what the money buys against the rest of the field.

Read the full method — including how we pick a top pick, and how prices get on the page.

Questions

Frequently asked questions

+How high does a high-lift floor jack go?

The highest published ceiling among the jacks we cover is 24.4 in, on the Sunex 66035HR Skyhawk, followed by 24 in on the Arcan A20016. A typical 3-ton jack stops between 18 in and 21 in, and budget 2-ton jacks stop between 13-3/8 in and 14 in.

+Do I need a high-lift jack for jack stands?

Only if the stands are tall. Three-ton stands commonly top out near 16-3/4 in, which an 18 in jack clears. Six-ton stands start at 15-3/8 in and reach 23-13/16 in, and raising a vehicle onto those at the top setting needs a jack with a ceiling above them.

+Is a high-lift jack less stable?

The jack is not, but the raised vehicle is: more height means a higher center of mass and less tolerance for a sloping or soft surface. The answer is a level concrete floor, chocks on the wheels still down, and getting the load onto stands promptly rather than working off the jack.

+Why are high-lift jacks so heavy?

Travel costs steel. A longer cylinder, a longer chassis to stay stable at full extension and a bigger saddle all add mass, which is why the published weights at the top of this page are 92.59 lb and 96.8 lb rather than the 22 lb of a small 2-ton jack.

Sources

Where these figures come from

Read next

Related reading