
Short answer: the Arcan A20019 for most cars - 3.75 in to 18 in, 3 ton, 56 lb of aluminum, which is the best balance of fit, reach and weight here. The best value is the Torin BIG RED T83006, the one product on this page literally sold as a "trolley jack", and the cheapest route to 20-7/8 in of lift if your car will accept its 5-7/8 in minimum height. The budget pick is the Pro-Lift F-757G at 22 lb and 3-5/8 in. If the vehicle is tall, the Sunex 66035HR Skyhawk is the only jack here that starts low and reaches 24.4 in.
What we judged these on
1. The lift range, bottom and top
A wheeled jack is defined by two published numbers, and they pull in opposite directions. The minimum saddle height decides whether the jack goes under your car at all: Sunex publishes 3.58 in, Arcan 3.75 in on the A20019, Pro-Lift 3-5/8 in, and Torin 5-7/8 in. The maximum decides whether you can get the car onto a stand: 13-3/8 in on the F-757G, 18 in on the A20019, 20-7/8 in on the T83006, 21.75 in on the GWLPFJ3T, 24.4 in on the Skyhawk. A jack is only right for your car if it clears both ends of that sum.
2. Weight, because it decides whether you use it
Published weights on this page run from 22 lb to 96.8 lb. The light end is a tool you lift into a trunk; the heavy end is shop equipment that stays where it lives. Nobody regrets a heavy jack on the day they need its reach, and everybody regrets one on the day they only wanted to rotate a tire. Aluminum vs steel floor jack is where that trade gets settled on material.
3. What the maker says about the standard
US portable automotive service equipment is covered by ASME PASE, and makers' claims vary in strength. GEARWRENCH states the GWLPFJ3T meets ASME PASE-2019, naming the edition. Sunex states the Skyhawk is ASME PASE compliant. Torin and Pro-Lift publish overload and bypass valve statements but no PASE claim. Arcan publishes no standards statement for the A20019 at all. That ordering is a fact about the paperwork, not a measurement of the steel, and we have placed the Arcan first anyway on the strength of its other published figures - with the gap stated out loud.
4. The wheels, which is what makes it a trolley
The one spec that is actually about the trolley part, and almost nobody publishes it. Pro-Lift does: two fixed steel casters and two swivel casters on the F-757G. Fixed rear wheels and swivel fronts are what let a jack track straight as it rolls in and then pivot to line up the saddle. On a rough garage floor, small hard wheels bind on every crack - which is a real reason to prefer a jack that lives on a smooth slab.
The five on published figures
| Jack | Capacity | Lift range | Weight | Standards claim |
|---|---|---|---|---|
| Arcan A20019 | 3 ton | 3.75 - 18 in | 56 lb | None published |
| BIG RED T83006 | 3 ton | 5-7/8 - 20-7/8 in | Not published | Safety bypass system |
| GEARWRENCH GWLPFJ3T | 3.5 ton | 3.75 - 21.75 in | 96.8 lb | Meets ASME PASE-2019 |
| Pro-Lift F-757G | 2 ton | 3-5/8 - 13-3/8 in | 22 lb | Overload valve bypass |
| Sunex 66035HR Skyhawk | 3.5 ton | 3.58 - 24.4 in | Not published | ASME PASE compliant |
There is no jack here that wins every column, which is why this page ends in a recommendation rather than a score. The widest useful range belongs to the heaviest jacks; the lightest jack has the narrowest range.
What has to be bought with it
A trolley jack on its own cannot do a single job safely. You need a pair of stands whose height range your jack can actually reach, and a pair of chocks for the wheels that stay down. Floor jack and jack stand combo matches the heights for you, and wheel chocks guide covers the purchase almost everyone skips. If the car is low enough that no jack here will fit under the sill, a pair of thin ramps to roll the front wheels onto first is the standard fix - best car ramps for low cars has those.
What we would buy
The Arcan A20019, for a car, because 56 lb and a 3.75 in start is the combination you will keep using. If the price matters more than the weight and your car has normal ride height, the T83006 gives you more lift for less money and is the honest value pick on this page. If you lift a tall vehicle, the Skyhawk. If you need the lightest thing that works, the F-757G - and buy the stands at the same time, because 13-3/8 in of lift only works with stands that go low enough to accept it.



